ZY-H3015FT 1500W

CREATE_TIME:2019-4-11 VIEWS:858

  Laser cutting is the best cutting method among all kinds of cutting techniques that people have mastered at present. Compared with traditional cutting, laser cutting has the advantages of small thermal deformation, high cutting precision, small noise, no pollution, easy to realize automatic cutting, and the processing cost is 50% less than that of mechanical processing.Fiber laser cutting machine is the most advanced fiber laser output high energy density laser beam, and focus on the workpiece surface, is the workpiece by ultra-fine focus spot irradiation area instantaneous melting and gasification, through the CNC mechanical system moving spot irradiation position and automatic cutting.It is a set of the most advanced fiber laser technology, CNC technology, precision machinery technology in one of the high-tech equipment.

 

  ZYH3015FT 1500W Performance feature

  1.Dual servo motor drive.

  2.Higher stability, higher speed and faster acceleration.

  3.Full digital CNC servo motor communication.

  4.The changing table reduces the time of loading and unloading and improves the cutting efficiency.

  5.The machine adopts gantry structure, imported reducer and high precision linear guide rail, smooth transmission, high precision, greatly improve the production efficiency of the machine tool.

  6. The bed adopts integral welding structure, rough machining after annealing, and then vibration aging treatment, can completely eliminate the stress of welding and processing, good rigidity, high precision, can maintain long time use without deformation.

  7. The beam is made of aluminum alloy and cast as a whole. After two times of high temperature annealing, rough machining and vibration aging, it has good rigidity, light weight and good dynamic performance after high precision machining.

  8. The imported high-precision electronic proportional valve can precisely control the air pressure of auxiliary cutting gas to achieve the best cutting effect.It is more accurate and convenient than manual pressure regulating valve.

 

  Fibre laser

  1. High photoelectric conversion efficiency, water and electricity saving cost.

  2. Fiber laser has excellent thermal performance, high electro-optical efficiency, water and electricity saving, especially important is the long-term maintenance-free use, can save a lot of maintenance costs and time, improve work efficiency.

  3. Fiber laser cutting machine has obvious advantages in thin plate cutting.

 

  Main configuration:

  1.Fiber laser power:1500W

  2.Cutting range:3000mmX1500mm

  3.Cut sheet thickness:carbon steel:14mm,stainless steel :5mm

 

  Main parameters 

NO.

Project

Parameter

Unit

1

Cut sheet size

3000×1500

mm

2

XAxis stroke

1525

mm

3

YAxis stroke

3050

mm

4

ZAxis stroke

100

mm

5

positionaI accuracy

±0.03

mm/m

6

repeated positioning accuracy

0.02

mm

7

Maximum feed velocity on XY axis

120

m/min

8

Cutting precision

±0.05

mm/m

9

ZShaft height control

Numerical control, follow-up

 

10

ZAxial servo system

Capacitive height sensor

 

 

11

Laser power

1500

W

12

The thickness of the cutting(provided that the cutting conditions are satisfied)

Carbon steel0-14

mm

Stainless steel0-5

mm

 

  Laser parameter

 

Laser model

Fly bo1500W

Laser form

Fiber Laser

laser output power

1500W

Laser power stability

≤±3%

optical maser wavelength

1070mm

cooling water flow

≥3.5 L/min

coolant temperature

21℃~26℃

Cooling water pressure

0.3~0.45MPa

 

  Random standard configuration:

  1) fiber laser

  2) the workbench

  3) high-end CNC system

  4) water cooling unit for laser

  5) drawer type high pressure laser cutting head

  6) capacitive cutting head height detection system

  7) special automatic programming software for laser cutting machine

  8) electronic proportional valve precise air pressure control system

  9) high pressure cutting system10) automatic cutting auxiliary gas conversion system

 

NO.

 

Name

Brand/model

1

Special numerical control system for laser cutting

BaiChu

2

Motor and drive

Japan panasonic

3

Fiber laser

Fly bo

4

Electric proportional valve, solenoid valve

JapanSMC

5

Electrical control system for machine tool

Schneider

6

water-cooling machine

  • Tongfei/DeWitt

7

  • Automatic focus cutting head

Switzerland Ray Tools

8

gear rack

TiwanYYC

9

reduction box

neugut

10

linear guideway

Linear motion guide

 

  The basic principle of laser cutting machine

  The principle of laser cutting is to focus the laser beam into very small points of light, so that the focus of a very high power density, this is the beam input (conversion of light energy) of heat far more than the material reflection, conduction or diffusion of the part, material quickly heated to the gasification temperature, evaporation hole.As the beam and material move relatively linearly, the holes form slits of very narrow width.

  Laser cutting features:

  1. Narrow slit, small deformation, high precision, fast speed and high efficiency

  2. Laser cutting is a kind of contactless machining with high energy, high density and good controllability

  3. Compared with punch and plate shearing machine, it does not need molds, which saves the time of changing molds and reduces the processing cost.Able to cut complex shapes.

  Control system: Shanghai baichu

  Shanghai BaiChu system based on Windows operating system CypCut optical fiber laser cutting machine CNC system, integrates the function of many laser cutting control dedicated, powerful functions, the software provides a wealth of laser cutting process parameters, flexible layout and cutter path editing ability, introduce out, bridge, edge, light compensation, automatic curve smoothing, division, merger, distinguish between internal and external mold, etc from soup to nuts, provide real-time speed PWM power regulation, gradual perforation flameproof hole and a special process, convenient operation, do not need to generate G code on the computer, directly to the CAD file to import the system can be cut, etc.

 

  Laser cutting head: Swiss  Ray Tools

  The function of the fiber laser cutting head is mainly to spread the very thin laser coming out of the fiber head through the beam expanding mirror to enlarge the spot, and then make the laser beam form a focus near the cutting nozzle through the focusing mirror to cut the workpiece through the auxiliary gas

 

  Chiller: DeWitt or co-pilot

  The role of the chiller: laser, optical fiber head, cutting head in the work of heat, direct cooling water effect is better, the role of the chiller is cooling laser, optical fiber head, cutting head.The water requirement of the chiller is distilled water to reduce the corrosion of the inner wall of the laser.

  Technical parameters

Model ZYM3015 ZYM4020 ZYM6020 ZYM6025
working width 3000*1500MM 4000*2000mm 6000*2000mm 6000*2500mm
XAxis stroke 1500mm 2000mm 2000mm 2500mm
YAxis stroke 3000mm 4000mm 6000mm 6000mm
repeated positioning accuracy ±0.03mm ±0.03mm ±0.03mm ±0.03mm
Maximum running speed 90m/min 90m/min 90m/min 90m/min
kind of drive Precision rack dual drive Precision rack dual drive Precision rack dual drive Precision rack dual drive
Power rating 380V50Hz 380V50Hz 380V50Hz 380V50Hz
Laser power 500W-6000W 500W-6000W 500W-6000W 500W-6000W
Power supply 380V50Hz three-phase four-wire 380V50Hz three-phase four-wire 380V50Hz three-phase four-wire 380V50Hz three-phase four-wire

 

Related articles